BC-E-009
Application
Automatic lifting door bottom soundproof strip is installed at the bottom of the door. When the door is closed, it will automatically extend down the sealing strip to press the ground and close ttie gap between the door bottom and the ground. When the sealing door is opened. the sealing strip will automatically retract away from the ground, which will not affect the door switch and will not damage the ground. The hidden door bottom strip does not affect the appearance of the door, after the installation of the door bottom seal strip, can effectively prevent external dust, odor, cold and hot airflow, noise, light, etc. from the door bottom gap into the room, protect the indoor environment, is the hotel hotel, high—grade decoration, purification space, the best supporting products of the industrial door bottom.
Section view
1. Open parallel slots in the center of the thickness of the bottom of the door. Open parallel slots according to different models.
2. Fully embed the cut bottom sealing strip into the slot to unify the bottom of the door with the bottom of the door.
3. Turn the adjusting knob on the bottom of the entry seal by the hinge side of the push rod end screw, make It and the door frame necessary Impact, in the impact of the door frame installation of anti—Impact stainless steel sheet.
4. Close the door gently and observe the action of the bottom sealing strip. It can be seen that the sealing strip slowly pops out and connects with the ground.
The Product Installation
